Contemporary bathroom light fixtures – A bathroom lighting device can be replaced by a normal light bulb on the ceiling of a bathroom. To connect the device correctly, connect the device cables to the cables in the electrical junction box inside the ceiling plate. The black and white wires attached to the electrical connection box and for fixing do not include the possibility of incorrectly wiring the lamp. You will need some basic household tools. Go to the fuse box and trip the circuit breaker that supplies electrical power to the bathroom. Place a ladder under the light bulb on the bathroom ceiling. Unscrew the bulb from the bulb cap. Place the bulb on its side. Remove the screws from the ceiling plate, using a Phillips screwdriver.
Pull the ceiling plate. Pull the wires out of the hole in the ceiling. Twist the flange thread connectors to the left to remove them from the twisted pairs of black and white wires. Separate the wires from each other. Place the ceiling plate on one side. Wrap the exposed end of the black wire on the underside of the contemporary bathroom light fixtures around the exposed end of the black wire that attaches to the electrical junction box. Wind the exposed end of the white wire of the appliance to the exposed end of the white wire of the electrical junction box. Screw one screw-tab connector on each of the two pairs of cables.
12 Photos Gallery of: Contemporary Bathroom Light Fixtures Install
Push the wires into the hole. Place the bottom of the contemporary bathroom light fixtures on the ceiling, over the hole. Screw wood screws through the holes on all sides of the appliance and into the ceiling using a Phillips screwdriver. Screw a bulb or bulbs, depending on the lamp bulb socket number. Place the dome cover over the bulb (s) and climb up the front of the unit. Tighten the fastening screws that surround the dome until resistance is felt. Restore electrical power to the bathroom.