Contemporary bar cabinet – To make contemporary bar cabinet on a small budget, you need a cupboard with a lid; 4 legs; a mirror that is as big as the back of your 2 flap fittings; if you think it is necessary, you can also use a lock that holds the door in place. While the instruction; first, start by assembling the cabinet. Second, paint the cabinet. Just this cabinet has a basic treatment, so it’s a good idea to use a primer. But if the cabinet is not ground painted, you should sand the entire surface easily before painting. These to make sure the color are firmly attached.
Third, when the cabinet and legs are painted, it is time to attach the mirror to the rear wall of the contemporary bar cabinet. Use the pads that brought the mirror and place it centrally on the back cover. Then add a single pressure so that everything is firmly attached. Fourth, attach the cover as instructed, and place the cabinet (with the cover down) on a level surface to facilitate when securing the flap fittings. Put down a book or similar as the cover can rest. So you have a 90 degree angle to work with. The flap fittings must be screwed. So that they are fully extended when the cover is at a 90 degree angle.
12 Photos Gallery of: Contemporary Bar Cabinet On A Small Budget
Also take care to secure the handle before the legs are screwed. Fifth, now it’s time to fix your legs. Turn the contemporary bar cabinet upside down and decide how you want your legs to sit. The holes already available will not be used as they are too big. So new holes must be drilled before you can tighten your legs so that there are no cracks. At least two screws are needed on each leg. And make sure the screws do not get too long so they cross the other side and create bad marks. The last thing to do before your new contemporary bar cabinet is ready is to screw the handle.